The sheets are used for the manufacture of components used for the sealing of fixed joints;
For reduction of abrasion loss of metal surfaces and for absorbing temporary loads. They are also used as gaskets, floorings and other sealing components that operate under pressures up to 0,1 MPa.
Depending on the application two types are available:
I – rubber sheets
II – rubber-textile sheets
The following grades are available:
- high and low temperature resistant, oil-, acid-, alkali-resistant
- oil-, petrol-resistant
- atmosphere-resistant
- food sheets
Grade |
Type |
Hardness |
Temperature, °C |
Operating media |
high and low temperature resistant, oil-, acid-, alkali-resistant |
I, II I, II I, II |
soft medium hard |
from –45 to +80 from –30 to +80 from –30 to +80 |
Ambient air room, tanks, vessels; nitrogen, inert gases with the pressure from 0,05 to 0,4 MPa or fresh, sea, industrial, waste water without organic solvents and lubricants, salt solution with concentration up to saturation point, acids, alkalis with concentration max 20% with the pressure from 0,05 to 0,1 MPa. |
oil-, petrol-resistant
|
I I |
Soft medium
|
from –30 to +80 from –30 to +80 |
Ambient air in rooms, tanks, vessels; inert gases with pressure from 0,05 to 0,4 MPa, or oils, oil-based fuels, petrol with pressure from 0,05 to 0,1 MPa. |
atmosphere-resistant
|
I, II I, II |
medium hard |
from –30 to +80 from –30 to +80 |
Ambient air in rooms, tanks, vessels; nitrogen, inert gases with pressure from 0,05 to 0,1 MPa. |
food sheets
|
I |
medium |
from –30 to +80 |
Cold and hot water, air. Milk and other food products, washing and disinfecting solutions. |
Dimensions:
- by curing on continuous vulcanizers:
thickness – from 1 to 8 mm
width – to 1300 mm
length, m – in rolls
- via oven curing :
thickness – from 12 to 60 mm
sheet size – 1300 x 1600 mm